Skip to content

Last updated

Reviewed against published research RSS

Clinic Treatments

Dermal Fillers: What They Are Made Of and How They Work

The main dermal filler materials, how each one adds volume or stimulates collagen, how long results last, the risks, and who should not have fillers.

A steel tray with instruments, saline bottles and vials on a clinic counter
Fig. 1 Filler materials differ in how long they last. Hyaluronic acid gels can be dissolved with an enzyme; PMMA is permanent. Photograph: Mateo Hernandez Reyes / Unsplash

"Filler" covers several different materials that behave in different ways once injected. Some add volume the moment they go in. Some work slowly by prompting the body to build collagen. One is permanent. Knowing which material is being used tells you a lot about how long results last and what can be done if something goes wrong.

What dermal fillers are

The U.S. Food and Drug Administration (FDA) describes dermal fillers as medical device implants, approved to smooth or add fullness to areas such as the lips, cheeks, chin, folds around the nose and mouth, and the back of the hands. The FDA approves specific products for specific uses in adults aged 22 and older, and it states that no dermal fillers are approved for over-the-counter use.

The FDA groups fillers into two broad types:

  • Absorbable (temporary) fillers, which the body breaks down over time. These are approved for moderate to severe facial wrinkles and folds and for adding volume to the lips, cheeks, chin and back of the hand.
  • Non-absorbable (permanent) fillers, approved only for nasolabial folds (the lines from nose to mouth corners) and certain cheek acne scars.

How it works: the main materials

Hyaluronic acid gels

In filler form, hyaluronic acid is made into a gel. A 2010 study in Bioconjugate Chemistry describes hyaluronic acid fillers as hydrogels made with cross-linking chemicals, such as 1,4-butanediol diglycidyl ether (BDDE), which link the chains together.

The gel works by occupying space. Once placed under a fold or in the lips, it lifts the skin above it immediately. The FDA notes that some hyaluronic acid used in fillers is made by bacterial fermentation.

Calcium hydroxylapatite and poly-L-lactic acid

These two materials are often called collagen stimulators. A 2026 systematic review in Aesthetic Plastic Surgery describes them as used to improve skin quality, restore volume and stimulate new collagen. Across 14 studies, both improved skin elasticity, wrinkles and facial volume.

The two work on different timelines. The AAD notes that calcium hydroxylapatite gives an immediate result, while poly-L-lactic acid results appear over two to three weeks, because the effect depends on the body's own collagen response.

PMMA (polymethylmethacrylate)

PMMA is a permanent filler. The AAD lists it as lasting permanently. The FDA notes that permanent fillers can be difficult or impossible to remove.

Fat from your own body

Fat can be moved from one area to another. The AAD explains that fat grafting starts with liposuction to remove fat from another part of the body, which is then processed and injected. Because it comes from your own body, it does not need FDA approval.

Comparing the materials

Table 1. Comparing the materials
Material How it adds volume Results appear Typically lasts (AAD)
Collagen Fills space Immediately 2 to 3 months
Hyaluronic acid gel Fills space Immediately 4 to 12 months
Calcium hydroxylapatite Fills space and stimulates collagen Immediately 6 months to 1 year
Poly-L-lactic acid Stimulates collagen Over 2 to 3 weeks 1 to 3 years
Your own fat Fills space Immediately 1 to 3 years
PMMA Fills space Immediately Permanent

The 2026 review reported somewhat different durations in the studies it examined: up to 25 months for poly-L-lactic acid and 12 to 18 months for calcium hydroxylapatite. Duration depends on the product, the area and the person, so ask your provider what to expect for the specific filler proposed.

The typical course of treatment

Consultation

The AAD notes that a dermatologist offers a consultation before injecting filler. This is the time to discuss the material, the area, how long it should last and what downtime to expect. The FDA advises asking about the injection sites and their risks and reading the patient labeling for the specific product.

The procedure

According to the AAD, most treatments take 15 to 30 minutes in one office visit. Depending on the filler and area, numbing may involve ice, an anesthetic applied to the skin or a nerve block. Lips often receive a nerve block. Some fillers require allergy testing first, and treatment has to wait for the results.

Recovery

The AAD notes that most people return to everyday activities after leaving the office. Its aftercare advice includes:

  • Waiting until the next day for exercise or strenuous activity
  • Avoiding sun exposure, tanning beds and indoor tanning
  • Not touching the treated area for three days unless told to massage it
  • For poly-L-lactic acid, gentle massage for about five minutes several times a day for one to two weeks, if your dermatologist advises it

Redness, swelling, tenderness and occasional bruising usually clear within 7 to 14 days.

Risks and complications

Common effects

The FDA lists bruising, redness, swelling, pain, tenderness, itching and rash as common.

Less common effects

These include raised bumps (nodules or granulomas), infection, open or draining wounds, allergic reactions and inflammation flaring after illness, vaccination or dental work. The AAD also lists lumps, ridges, over-filled areas and skin discoloration.

Vascular complications

The FDA identifies accidental injection into a blood vessel as the most concerning risk. It can cause tissue death, vision problems including blindness, stroke and, rarely, death.

A 2019 review in The Journal of Clinical and Aesthetic Dermatology analyzed 93 published cases of vascular complications. Blindness was the main outcome, in 61% of those cases, and 72% of the cases showed no improvement. Hyaluronic acid and autologous fat were the fillers most often involved. The authors concluded that injectors need thorough knowledge of facial anatomy. These were reported cases, so the figures describe outcomes when complications happen, not how often they happen.

Reversing hyaluronic acid filler

Hyaluronic acid filler can be broken down with an enzyme called hyaluronidase. A 2024 review in JMIR Dermatology describes it as able to treat most hyaluronic acid filler complications, including the Tyndall effect, non-inflamed nodules and allergic or hypersensitivity reactions. Emergencies such as vascular occlusion require immediate, high-dose treatment. Other filler materials cannot be dissolved this way, which is one reason the FDA notes that removing non-hyaluronic acid and permanent fillers can be difficult.

Who is not a candidate

The FDA lists people who should not get fillers, or who should wait:

  • People with active inflammation or infection in the area, until it is managed
  • People with bleeding disorders
  • People with severe allergies or a history of anaphylaxis
  • People allergic to collagen, eggs, animal products, lidocaine or bacteria, depending on the product
  • People prone to keloids or raised scars, for whom safety is unknown

The FDA also notes that safety has not been established during pregnancy or breastfeeding, in people under 22, or with repeated long-term use.

Practical points before treatment

  1. Choose a qualified injector. The FDA advises choosing a licensed provider with experience in dermatology or plastic surgery who is trained in filler injection. The AAD calls filler injection a medical procedure and warns that injection in non-medical settings can be extremely dangerous.
  2. Never inject yourself or buy filler online. The FDA warns that products sold online may be counterfeit or not approved.
  3. Avoid needle-free devices. The AAD reports that the FDA has not approved needle-free filler pens, and that people have suffered permanent damage to skin, lips or eyes from them.
  4. Ask what the material is. It determines how long results last and whether the filler can be dissolved.
  5. Seek help quickly. The FDA lists vision problems and tissue death among the serious risks, so any sudden change after injection should be checked by a doctor right away.

Results vary between people and depend on the material, the area, the amount used and the injector's skill.

The short version

Dermal fillers are injectable medical devices. Hyaluronic acid gels add volume directly, last several months to a year and can be dissolved with hyaluronidase. Calcium hydroxylapatite and poly-L-lactic acid also stimulate collagen and last longer. PMMA is permanent and hard to remove. Most side effects are mild and short-lived, but injection into a blood vessel can cause blindness or tissue death, so treatment belongs with a board-certified dermatologist or plastic surgeon who knows facial anatomy well.

References

  1. U.S. Food and Drug Administration. Dermal Fillers (Soft Tissue Fillers). fda.gov/medical-devices/aesthetic-cosmetic-devices/dermal-fillers-soft-tissue-fillers (opens in a new tab)
  2. American Academy of Dermatology. Fillers: FAQs. aad.org/public/cosmetic/wrinkles/fillers-faqs (opens in a new tab)
  3. American Academy of Dermatology. Needle-free fillers: The risks you need to know about. aad.org/public/cosmetic/safety/needle-free-filler-risks (opens in a new tab)
  4. Bioconjugate Chemistry (via Europe PMC). Effect of cross-linking reagents for hyaluronic acid hydrogel dermal fillers on tissue augmentation and regeneration. europepmc.org/article/MED/20078098 (opens in a new tab)
  5. Aesthetic Plastic Surgery (via Europe PMC). Efficacy, Durability, and Safety of Collagen Biostimulators Based on Poly-L-Lactic Acid (PLLA) and Calcium Hydroxyapatite (CaHA) in the Face: A Systematic Review. europepmc.org/article/MED/41184662 (opens in a new tab)
  6. JMIR Dermatology. Hyaluronidase for Dermal Filler Complications: Review of Applications and Dosage Recommendations. europepmc.org/article/MED/38231537 (opens in a new tab)
  7. The Journal of Clinical and Aesthetic Dermatology. Vascular Complications after Facial Filler Injection: A Literature Review and Meta-analysis. europepmc.org/article/MED/31360292 (opens in a new tab)

Links go to the abstract, full text or reference page. Found an error? See corrections.