Skip to content

Last updated

Reviewed against published research RSS

Sun Care

Mineral and Chemical UV Filters: How Each Blocks the Sun

How mineral and chemical sunscreen filters work, why zinc oxide mostly absorbs UV instead of reflecting it, and what absorption and allergy studies found.

Thick white paste spread in ridges across a white surface
Fig. 1 Mineral filters such as zinc oxide and titanium dioxide were long described as reflectors. Measurements show they mostly absorb UV and reflect only about 4% to 5%. Photograph: Joanna Kosinska / Unsplash

Sunscreens are often sorted into two camps: mineral formulas that "sit on top and reflect," and chemical formulas that "soak in and absorb." The first half of that description turns out to be mostly wrong. Both types protect skin by absorbing ultraviolet light, though they differ in how they feel, what they cover and how often they cause reactions.

The two families of filters

The active ingredients in a sunscreen are its UV filters. A 2023 review in Dermatitis divides them into two groups: organic filters, often called chemical filters, and the two inorganic filters, titanium dioxide and zinc oxide.

The American Academy of Dermatology (AAD) notes that sunscreens containing titanium dioxide or zinc oxide are called physical or mineral sunscreens. The AAD lists other common active ingredients on US labels, including avobenzone, bemotrizinol, ensulizole, homosalate, octinoxate, octisalate, octocrylene and oxybenzone.

"Organic" here is a chemistry term. A 2024 narrative review in Skin Health and Disease points out that it means carbon-based, not natural or environmentally harmless.

How it works

Chemical filters

According to the Skin Health and Disease review, organic filters absorb ultraviolet radiation and release that energy from the skin as heat. Different filters cover different parts of the UV range, as the table below shows.

Mineral filters

Zinc oxide and titanium dioxide were long described as tiny mirrors that reflect and scatter UV. A 2016 study in Photodermatology, Photoimmunology & Photomedicine measured this directly with an optical integrating sphere, an instrument that captures both transmitted and reflected light.

The study found that across the UV range, the two oxides reflected only about 4% to 5% of incoming light, which the authors calculated as less than SPF 2. The rest of their protection came from absorption, a property of semiconductor materials like these oxides. At longer wavelengths, in the far UVA and visible range, the oxides behaved differently and mainly reflected light, up to 60%. The authors concluded that both oxides protect mainly by absorbing UV.

This explains a familiar trade-off. The Skin Health and Disease review notes that larger mineral particles reflect visible light, which creates a white cast. Micronized or nanoparticle forms reduce the white cast but also reduce protection against visible light.

What each filter covers

The Skin Health and Disease review lists the range and notes for common filters. The table below summarizes part of it.

Table 1. What each filter covers
Filter Type Main range Notes from the review
Zinc oxide Mineral Broad spectrum Can leave a white cast
Titanium dioxide Mineral UVB and shorter UVA (320 to 340 nm) Can leave a white cast
Avobenzone Chemical UVA Listed as photounstable
Octocrylene Chemical UVB Absorbed through skin; questions raised
Bemotrizinol Chemical Broad spectrum Approved in the EU since 2000
Ecamsule Chemical UVA Approved in the EU since 1997

The choice of filters depends on where you live. The same review notes that the US regulates sunscreens as drugs, while Europe regulates them as cosmetics, and that the US had approved 17 UV filters compared with 29 in Europe.

Where US regulation stands

The FDA's question-and-answer page on sunscreen rules, current as of September 10, 2026, describes several actions.

  • Mineral filters. A 2021 proposed order would classify zinc oxide and titanium dioxide, at up to 25%, as generally recognized as safe and effective (GRASE). This is a proposal, not a final decision.
  • Two filters removed. On September 10, 2026, the FDA issued a final order removing PABA and trolamine salicylate from the sunscreen monograph because their risks outweigh their benefits. The FDA is not aware of US products that contain them.
  • Twelve filters need more data. The FDA proposed that cinoxate, dioxybenzone, ensulizole, homosalate, meradimate, octinoxate, octisalate, octocrylene, padimate O, sulisobenzone, oxybenzone and avobenzone are not yet GRASE because more data is needed. The agency states that this does not mean they are unsafe.
  • A new filter. On June 10, 2026, the FDA added bemotrizinol as a sunscreen active ingredient.

What absorption studies found

A 2020 randomized trial in JAMA tested how much of six chemical filters reached the bloodstream. Forty-eight healthy adults applied one of four sunscreen products at 2 milligrams per square centimeter to 75% of their body, once on the first day and four times a day for the next three days.

All six ingredients (avobenzone, oxybenzone, octocrylene, homosalate, octisalate and octinoxate) were absorbed. Their blood levels passed the FDA threshold of 0.5 nanograms per milliliter after a single application. Below that level, the FDA may waive some additional safety studies for a sunscreen ingredient. The authors stated that the findings do not mean people should stop using sunscreen.

The Skin Health and Disease review adds that mineral nanoparticles show minimal penetration beyond the outermost layer of skin. It judges the likelihood of harm from absorbed filters to be negligible and says the evidence does not support avoiding sunscreen.

Side effects and who should be careful

Allergy and irritation

Reactions to sunscreen filters are uncommon. The Dermatitis review reports that organic filters have caused both allergic contact dermatitis and photoallergic contact dermatitis, with oxybenzone the most frequently reported allergen among UV filters. It found no reports of either reaction to the mineral filters. The Skin Health and Disease review describes the overall incidence of filter-related dermatitis as low and notes that photoallergy is diagnosed with photopatch testing.

People with a history of reactions to sunscreen may do better with a mineral formula. Anyone with a persistent rash after using sunscreen can ask a dermatologist about patch testing to find the specific cause.

Infants

The FDA does not recommend sunscreen for babies younger than six months. Keep them out of the sun and ask a doctor before using sunscreen on them.

Pregnancy and children

The FDA notes that people with questions about sunscreen use for infants, children or during pregnancy should talk with a health care professional.

Environmental questions

The Skin Health and Disease review notes that oxybenzone and octinoxate are thought to contribute to coral bleaching and have been banned in some places, including a ban on oxybenzone in Hawaii. It also notes that real-world evidence of sunscreen causing coral bleaching is limited and that warming oceans are considered a major factor.

Mineral or chemical: a comparison

Table 2. Mineral or chemical: a comparison
Question Mineral (zinc oxide, titanium dioxide) Chemical (organic)
Main way it protects Absorbs UV; reflects some visible light Absorbs UV, releases heat
White cast Possible, less with micronized particles Usually none
Allergy reports None found in the 2023 review Uncommon; oxybenzone most often reported
Absorption into blood Minimal penetration reported Measurable for six tested filters
US status Proposed GRASE Twelve filters need more data

Practical steps

Read the active ingredients

US labels list filters under "Active Ingredients." This tells you whether a product is mineral, chemical or a mix.

Choose for your skin

If sunscreens have stung or caused a rash before, a mineral formula is a reasonable first try, given the lack of allergy reports for zinc oxide and titanium dioxide. If white cast is the problem, a micronized mineral or a chemical formula may suit you better.

Do not trade protection for worry

The FDA, the JAMA authors and the Skin Health and Disease review all advise continuing to use sunscreen. The FDA recommends pairing it with protective clothing, hats, sunglasses and shade. Whichever type you choose, look for broad spectrum protection and reapply at least every two hours, as the FDA advises.

The short version

Chemical and mineral filters both protect skin mainly by absorbing ultraviolet light. Mineral filters reflect only a small share of UV, about 4% to 5%, but do reflect more visible light, which causes their white cast. Chemical filters are absorbed into the blood in measurable amounts, and the FDA has asked for more data on twelve of them without calling them unsafe. The 2023 allergy review found no reported allergic reactions to mineral filters, which makes them a practical choice for reactive skin.

References

  1. Skin Health and Disease (via PMC). Sunscreens: a narrative review. pmc.ncbi.nlm.nih.gov/articles/PMC11608887 (opens in a new tab)
  2. Photodermatology, Photoimmunology & Photomedicine (via Europe PMC). Metal oxide sunscreens protect skin by absorption, not by reflection or scattering. europepmc.org/article/MED/26431814 (opens in a new tab)
  3. JAMA (via PMC). Effect of Sunscreen Application on Plasma Concentration of Sunscreen Active Ingredients: A Randomized Clinical Trial. pmc.ncbi.nlm.nih.gov/articles/PMC6990686 (opens in a new tab)
  4. Dermatitis (via Europe PMC). Sunscreens: A Review of UV Filters and Their Allergic Potential. europepmc.org/article/MED/36279254 (opens in a new tab)
  5. U.S. Food and Drug Administration. Questions and Answers: FDA's regulatory actions on over-the-counter sunscreen. fda.gov/drugs/understanding-over-counter-medicines/questions-and-answers-fdas-regulatory-actions-over-counter-sunscreen (opens in a new tab)
  6. U.S. Food and Drug Administration. Sunscreen: How to Help Protect Your Skin from the Sun. fda.gov/drugs/understanding-over-counter-medicines/sunscreen-how-help-protect-your-skin-sun (opens in a new tab)
  7. American Academy of Dermatology. How to decode a sunscreen label. aad.org/public/everyday-care/sun-protection/shade-clothing-sunscreen/understand-sunscreen-labels (opens in a new tab)

Links go to the abstract, full text or reference page. Found an error? See corrections.